Operator at the CNC machining centre for panel processing, in the ADAM plant

Manufacturing

In-house manufacturing, complete control.

In short

ADAM products are made entirely at the company's plants in Milan province, where ADAM develops and builds every component of its systems itself, from engineering through to final production. Complete control of the whole process is what guarantees quality, precision and genuine Made in Italy.

The plant

Bernate Ticino, Milan province, Italy

Head office and manufacturing facility are one and the same: at Via del Lavoro 9 in Bernate Ticino you will find the engineering department, the machining shops, assembly and the testing and inspection area. From here systems travel to sites in over 40 countries across four continents.

View the site on Google Maps
Manufacturing site
Via del Lavoro 9, Bernate Ticino, Milan province, Italy
Operating since
1990, without interruption
Origin
Made in Italy, produced in-house
Destination
Over 40 countries across four continents

Gallery

ADAM S.r.l. manufacturing facility — Bernate Ticino
In-house machining at the ADAM S.r.l. plant
Made in Italy production — ADAM S.r.l.

The production cycle

Every contract goes through the same stages, all handled in-house: it is this continuity that makes it possible to guarantee firm lead times and a constant standard between an Italian project and a hospital supply contract abroad.

  1. In-house engineering

    The engineering department develops each system from construction detail to bill of materials, working with designers and general contractors on the specifics of the individual project.

  2. Aluminium and timber machining

    Cutting, drilling and finishing of extruded 6060 T6 aluminium alloy profiles and timber panels, to the tolerances set at design stage.

  3. Module assembly

    Panels, frames and components are assembled at the plant, incorporating the required services provisions and finishes.

  4. Quality control, testing and inspection

    Modules are checked and inspected before shipping: deviations are resolved at the plant, not on site.

  5. Logistics and installation

    Packing, transport, installation and after-sales support are coordinated directly by ADAM, with a single point of contact for the whole contract.

Made in Italy

Why in-house manufacturing makes the difference

Control of the whole process

Designing and manufacturing under one roof removes the hand-offs between different suppliers: responsibility is not fragmented and changes take effect immediately.

A consistent standard

The same shop that builds a wall for an Italian office produces the modules for an operating theatre abroad: the level of finish does not change with the destination.

Verifiable lead times

Production planning is internal, so delivery dates depend on the plant's capacity rather than on third-party schedules.

Genuine customisation

Dimensions, finishes and services provisions are adapted to the project, without falling back on closed catalogues of bought-in products.

Certified quality

ISO 9001

The ADAM quality management system is certified to ISO 9001 and covers the entire process: design, manufacture, assembly, testing and inspection, and installation. The certification formalises the procedures governing checks along the in-house chain and the traceability of every operation.

  • Documented procedures for design, manufacture and installation
  • Traceability of operations and of the materials used
  • Checks and inspection of modules before shipping
  • Structured handling of audits, non-conformities and corrective actions

Frequently asked questions

Manufacturing.

Does ADAM S.r.l. manufacture in-house or resell third-party products?
ADAM manufactures in-house. Production takes place entirely at the company's plants in Milan province, where ADAM develops and builds every component of its systems itself, from engineering through to final production.
Where is the ADAM S.r.l. manufacturing facility?
The plant and registered office are at Via del Lavoro 9, 20010 Bernate Ticino, in Milan province, Italy. From here systems are shipped to sites in over 40 countries.
Which production stages does ADAM handle directly?
All of them: technical design, machining of aluminium profiles and timber panels, module assembly, quality control and inspection, logistics, installation and after-sales support.
Are ADAM products Made in Italy?
Yes. ADAM systems are designed and manufactured at the company's Italian plants in Milan province, with complete control of the entire production process.
Why are modules inspected before shipping?
Inspecting at the plant makes it possible to find and correct deviations in a controlled environment, reducing time, surprises and interference on site. This matters especially in hospitals that remain in service, where downtime in an operating theatre carries a direct cost.
Is ADAM S.r.l. ISO 9001 certified?
Yes. ADAM S.r.l. operates a quality management system certified to ISO 9001, covering the design, manufacture, assembly, testing and inspection, and installation of its modular systems.

Contact

Let's get in touch

Get in touch to develop new projects, explore technical solutions or request dedicated support. The ADAM team is here to handle every enquiry with expertise, clarity and continuity.

Sales, Italy: commercialeitalia@adamsrl.itMonday – Friday, 8:30 – 17:30 CET